Posts Tagged ‘Custom Optimus Prime’

In 2012, I was invited to customize a Transformers figure for the upcoming Cybertron Con 2012 at Resorts World Sentosa.

Cybertron Con is a convention for all Transformers fans stunning exhibition of TRANSFORMERS collectible toys as well as activities for fans to experience a wide variety of offerings from Hasbro’s toy line and entertainment in this bi-annual event.

I chose to customize the dual model kit Optimus Prime with my “signature” battle damage finish. The other choice was Bumblebee. It was a thrill to have my custom displayed at the convention alongside professional customizers.

Hasbro sent me the model kit and I got to work.

This was quite a tedious custom to do. Gundam customizers will find it run-of-the-mill as they are used too painting models but generally, all my customs have been assembled toys that I dismantle to customize. As a result, the process of painting and battle damaging is quite differet. I painted as I built up the model. This was more time consuming but ensured I got the right colours and textures for the completed model.

 

 

 

 

 

Some of the customization includes:

  • For the exo-skeleton, I used a flat black base coat then gave a dry brushing of gun metal followed by a dry brushing of chrome steel. This gives a nice textured and layered realistic look.
  • Some elements are given a complete chrome steel finish or straight gun metal finish to highlight features.
  • Lots of copper and gold trimmings were added to give detail to the otherwise plain exo-skeleton.
  • I reprinted in the red and blue parts, maintaining the flame patterns through careful brush strokes.
  • Battle damage was applied – bullet holes, laser slashes, dents and scratches.
  • Flat Aluminum paint with delicate strokes were used to create the battle damage wear.
  • I also added a stainless steel “Autobot” emblem on Optimus’ right shoulder.
  • Parts of the model were given a black wash to give it a gritty look.
  • I also gave grass and mud effects in the wheels of the model.
  • To cap off the display, I cut off a Leader Class Starscream figure and applied severe decapitation damage complete with green blood.

This figure took about 38 hours to do including drying time.

The following photos were taken after painting but before battle damage and weathering effects were applied.

The following photos were taken after battle damage and weathering effects were applied.

I was featured in the 10 Mar 2012 edition of The New Paper for my customizations. Read the article online HERE.

I have not done a custom in quite some while and with the Transformers: Dark of the Moon movie out, I knew it was a matter of time before my fingers started to itch again.

Not surprising, I am tackling an Optimus Prime figure, specifically, a Ultimate Jet Wing Optimus Prime.

Not many people have tackle this custom yet in this size except pro-customizer “Frenzy Rumble”. His interpretation of the Dark of the Moon Ultimate Optimus Prime is spectacular as usual but it is a non-transformable figure.

As with my Power Up Leader Class Optimus Prime which is still the only one I’ve seen that has all detachable parts and can transform, this figure is similar in that all parts can be detached and Optimus Prime can be transformed to his vehicle mode.

This figure is created from a Hasbro “Ultimate Optimus Prime” and Takara ” Jet Wing Optimus Prime.

The main Optimus Prime figure used is a Leader Class Prime. The figure that comes with the “Ultimate Optimus Prime” is a size between the Voyager Class and Leader Class but I managed to keep him completely untouched in this custom so he joins my display cabinet.

I cut out and shaped multiple pieces from the “Omega Combat Armour” from the trailer of “Ultimate OP”. Individual pieces of armour  will be attached to the Jet Wing Leader Class (JWLC) OP using mini neo-earth magnets. I removed the hands of the JWLC OP, shaved them down and added flat disc magnets. Bigger magnets are embedded inside the wrists of the figure so that the regular hands are now detachable and can be replaced with the “power up” combat armour hands (which are bigger).

Detachable armour includes:

  • Combat Armour Hands
  • Forearm Guards
  • Arm Guards
  • Shoulder Guards
  • Shin/ Knee Guards
  • Crotch Guard
  • Torso Wing Armour
  • Jet Wing Pack (No modifications from original except detaching the Gatlin Guns)

I will also add Energon Swords to the forearms of the final figure.

Besides the Jet Wing mode, I was also able to modify what was left of the trailer “Omega Combat Armour” so that the new Ultimate Jet Wing OP (sans the Jet Wing Pack) could be secured mounted onto the trailer to create a battle station. This replicates OP stepping into into his trailer that converted to a battle station to get his weapons  in the movie.

The Gatlin Guns are attached to this trailer and the trailer wings are extended out to create a very cool enhanced “Ultimate Optimus Prime” with the enhanced Leader Class Prime.

Best of all, OP converts to his truck mode and the battle station converts to his trailer.

Here are work-in-progress photos. The figure is far from complete, lacking sanding and polishing for cut parts, embedding all the magnets and the big paint job.

Ultimate Jet Wing Leader Class Optimus Prime

Ultimate Jet Wing Optimus Prime with Jet Wing pack removed and figure mounted into Trailer Battle Station

Size comparison of Ultimate Jet Wing Leader Class Optimus Prime in Battle Station with the original Dark of the Moon Ultimate Optimus Prime figure

Ultimate Jet Wing Optimus Prime in alternate Truck Mode. Trailer in Vehicle mode. All armour and weapons removed.

With Transformers: Dark of the Moon movie released, I thought it would be fitting to revisit some of my favourite custom Optimus Primes that I hand painted and modified.

You can see all my customs at http://www.flickr.com/photos/jcsum/ But here are a few of my favourites.

First, the one that a lot of people know me for. A transformable Battle Damaged Power Up Optimus Prime. The biggest custom I have done. You can see the full specs here.

One of my personal favourites, because it is a great mold, is the Voyager Class Optimus Prime from the Hunt for the Decepticons series. You can see the full specs here.

An army-themed Optimus Prime with military weapons and a real working flame thrower! You can see the full specs and watch the video of the flame thrower in action here.

Old-School Prime was another creative theme by repainting the 2007 movie Prime with his Generation One colour scheme. This was a popular custom too. You can see the full specs here.

Old School Prime 2

Now, the movie….

I should start off that I enjoy Michael Bay’s movies, visual style, trademark filming angles and almost-campy stylized moments. I take them for what they are… entertaining summer block buster movies, eye candy, visual bubble gum and just good fun.. So, I think it is silly when people criticize his story development, character development or fantastical plot or action scenes.

However, TF3 was just one incoherent almost-3-hour crap fest. Multiple subplots and seemingly unconnected & disjointed scenes. In fact, different scenes  seem like they came from different movies and this happens throughout the movie. I don’t expect a perfect seamless story but at least tell the story well. We sit through the movie for 15 minutes worth of action and maybe 4 or 5 Michael Bay moments.

Characters… I think we don’t expect much from a Michael Bay movie in terms of intricate characters BUT characters from his movies have always been well-defined albeit one-dimensional. In TF3, the Autobots seemed less effective at killing Decepticons than the humans and in fact often turned up after the humans killed or fended off the Decepticons. This happen significantly at least twice. Where were they? I know Optimus Prime was literally hanging around for an unimaginable point of time. For a robot who has energon laser swords and axe, it is strange he can’t cut himself free from entangled cables.

Speaking of OP, his character was reduced to an almost unimpressive incompetent second-in-command. Even Megatron had to save his a** at the end. How is Hasbro going to move OP merchandise if OP is made to look so weak. Megatron… the once all mighty Decepticon leader is now a brooding robot who lacks confidence and sits around to mope during the final battle. It takes a girl who has no previous knowledge about the robots to use psychology on an alien race to talk him into getting off his a** and do something about it.

I thought TF3 would be a sure hit… hard to screw up. After all, you have a great fan base, impressive-looking robots and cool transformations & actions scenes and a ready summer movie audience. But… I guess this was his last TF film so he just “Michael Bay-ed” it.

A fellow Singapore magician, Alexander,  made good analogies to TF3 and magic. You can read his thoughts here. Basically, TF3 is a lot like a trend of magic stage acts. You probably know the ones I’ve talked about previously … endless barrage of canes, parasols, cards, snowstorm, confetti and kabuki streamers.

Show a 2min highlight and it looks awesome and impressive. Watch a full show and it becomes senseless flurry of incoherent actions and effects that do not result in a magical experience. Good movies are supposed to do the same, suspend the audience’s belief and get them immersed in the movie world.

Bad magic and bad movies keep the audience unsettled and even distracted because they have no idea what is going on and why certain things happen. I’m often distracted by magic acts that have a flurry of stylish poses and gestures that do not even end in a magic effect. Half the time, it is to look cool or to match a beat or timing in the music.

I’m all for visual bubble gum, flashy moves and effects, but at least have it make some sense and bring the audience on an enjoyable journey.